|
output settings for writing designs to Tajima disk |
|
|
|
|
Question: How do I set output settings for writing designs to Tajima disk?
Answer:
Before you save a design to the floppy disk or hard drive in Tajima format, you will need to set up the parameters for the software to properly write the data. This is called the Machine Profiles - Output settings. These settings can be accessed from within the Edit, Design or Explorer Programs. This information is shared with all the programs, so it does not matter which program you use to make these settings. So, it is not necessary to make these changes in all three programs.
- To make these changes, click on the TOOLS menu at the top of the window in Edit, Design or Explorer.
- Click on MACHINE PROFILE (OUTPUT) from the drop down menu.
- The Machine Profiles settings window will open.
- At the top, change the Machine Profile using the drop down arrow to the right of the box, and scroll down to find TAJIMA - STANDARD, then click on it.
- Make sure the Disk code also says Tajima as well.
- Refer to the figure below to see the recommended settings for Tajima output.
- Make any changes necessary to copy the settings below.
- Click APPLY, SET AS DEFAULT and OK to save the settings.
|
