|
set input parameters for reading Tajima designs |
|
|
|
Question: How do I set input parameters for reading Tajima designs into the software?
Answer:
When reading a Tajima design from any source (floppy, CD, file), you will need to insure the proper code settings so that the trims and color changes are correctly imported. This is called the Machine Code Interpreter. This setting can be found under the TOOLS drop down menu in Edit, Design and Explorer. It is only necessary to change these settings in one of the programs as these settings will be shared by all of the programs.
- Click on the TOOLS drop down menu at the top of the window in Edit, Design or Explorer.
- Click on MACHINE CODE INTERPRETER from the menu.
- The Machine Code Interpreter settings window will open.
- At the top, change the Name, using the drop down arrow to the right of the box and scroll down to find TAJIMA - STANDARD, then click on it.
- Refer to the figure below to see the recommended settings for Tajima Code Interpreter (input).
- Click APPLY, then OK to save the settings.
|
